EV fast charge time with taper

Run — free

Below roughly eighty percent state of charge many packs can accept near-peak power; above that threshold the battery management system ramps power down to protect cells, so the last twenty percent often takes as long as the middle of the curve. A flat hours equals energy over peak power estimate therefore understates real stop time whenever the session crosses the taper region. This EV fast charge time with taper calculator accepts usable pack capacity in kilowatt-hours, peak DC rate in kilowatts, and optional from and to state-of-charge percents, then applies a deterministic piecewise model: constant peak power until the taper start, then a linear decline of power toward a configurable fraction of peak at one hundred percent. The response reports tapered hours and minutes, the naive constant-peak baseline, and the extra minutes the taper adds so trip planners, fleet tools, and drivers can compare optimistic versus realistic dwell times without guessing from a brochure curve.

How to use it

Enter your values in the form above. The tool checks them before calculating and shows the result on the same page.

Check your inputs

Use the labels and units shown next to each field. If something is missing or outside the allowed range, the page points to the field to fix.

Use it again or automate it

Use the browser tool for individual checks and the API when you need the same capability in an automated workflow.

What you can do with it

Get an answer now

Enter one set of values and see the result without building a spreadsheet or script.

Compare scenarios

Change one value at a time and rerun the calculation to understand what affects the result.

Automate repeated work

Use the API when the same calculation needs to run inside your product or workflow.

FAQ

How do I use this capability?

Complete the fields above and run it on this page. The form highlights anything that needs attention.

For developers — API access

Everything on this page is available programmatically. This section is for teams who want to wire it into their own systems; everyone else can just use the tool above.

API endpoint

POSThttps://api.kit.forhosting.com/travel/ev-fast-charge-taper

Prefer to automate it? One authenticated POST creates the task; the result comes back by webhook or a signed link. The same capability also runs here on the web, by email and from Telegram — and soon from our app too.

Call it from your stack

curl -X POST https://api.kit.forhosting.com/travel/ev-fast-charge-taper \
  -H "Authorization: Bearer $KIT_KEY" \
  -H "Content-Type: application/json" \
  -d '{"battery_kwh":75,"peak_kw":150}'

const res = await fetch("https://api.kit.forhosting.com/travel/ev-fast-charge-taper", {
  method: "POST",
  headers: {
    "Authorization": `Bearer ${process.env.KIT_KEY}`,
    "Content-Type": "application/json"
  },
  body: JSON.stringify({
    "battery_kwh": 75,
    "peak_kw": 150
  })
});
const { task_id } = await res.json();

import os, requests

res = requests.post(
    "https://api.kit.forhosting.com/travel/ev-fast-charge-taper",
    headers={"Authorization": f"Bearer {os.environ['KIT_KEY']}"},
    json={
    "battery_kwh": 75,
    "peak_kw": 150
},
)
task_id = res.json()["task_id"]

<?php
$res = file_get_contents("https://api.kit.forhosting.com/travel/ev-fast-charge-taper", false, stream_context_create([
  "http" => [
    "method"  => "POST",
    "header"  => "Authorization: Bearer " . getenv("KIT_KEY") . "\r\nContent-Type: application/json",
    "content" => '{"battery_kwh":75,"peak_kw":150}',
  ],
]));
$task = json_decode($res, true);

body := bytes.NewBufferString(`{"battery_kwh":75,"peak_kw":150}`)
req, _ := http.NewRequest("POST", "https://api.kit.forhosting.com/travel/ev-fast-charge-taper", body)
req.Header.Set("Authorization", "Bearer "+os.Getenv("KIT_KEY"))
req.Header.Set("Content-Type", "application/json")
res, _ := http.DefaultClient.Do(req)

Example request

{
  "battery_kwh": 75,
  "peak_kw": 150
}

Example response

{
  "task_id": "tsk_a1b2c3d4e5f6a1b2c3d4e5f6",
  "type": "travel.ev_fast_charge_taper",
  "status": "queued",
  "_links": {
    "result": "/tasks/tsk_…/result"
  }
}

The API is asynchronous: the call returns a task_id immediately and the result arrives by webhook. Polling is capped at 1 req/s per task.

Pricing

Per request$0.002

Published price — no tokens, no invented credits. A failed task is never charged.

Errors

HTTP	Code	Meaning
`401`	`unauthorized`	Missing or invalid API key.
`402`	`insufficient_balance`	Your balance doesn't cover the task price.
`404`	`unknown_type`	That task type doesn't exist.
`429`	`rate_limited`	Too many requests. Use the webhook instead of polling.

Read the full KIT documentation →